Lexicon PSP42 v1.6.2
Stereo delays and a phrase sampler created on the basis of the classic Lexicon PCM 42 processor (the functionality and sound of the module were approved by Lexicon). The maximum delay time is 9600 ms (depending on the sampling rate), the sampling frequency of the delay line can be changed, the saturation of the magnetic tape is simulated, modulation (three sources: sine, rectangle and envelope repeater) pitch and delay time, synchronization with tempo. There is a low pass filter. Supported sampling rate up to 192 kHz, MIDI and VST-automation.
PSP 608 MultiDelay v1.6.1
Perhaps the most fully-functional delay plug available on the market. Each repetition has selectable feedback, stereo image and position, delay time, multimode filter, modulation, drive / tape saturation, and reverb. In addition, the feedback and drive parameters can be placed at the beginning or end of the signal chain. The modulation section consists of an LFO and an envelope, and the tape saturation algorithm is taken from the mastering processors. And of course all this can be done in any bitrate (up to 24-bit) and at any sampling frequency (up to 192kHz), and fully automated by MIDI and any host sequencer.
PSP 85 v1.1.0
A plugin designed to produce effects based on delay. The advantage of PSP 85 is the aggressive optimization algorithm and new significant functions that developers added, while maintaining the full compatibility of banks and presets with the well-known delay PSP 84. The plug-in comes with 16 Wild and Twisted presets, specially designed to highlight all the advantages of new features.
PSP BussPressor v1.0.3
Compressor optimized for group processing of channels or processing on the master bus. This is a classic VCA compression sound with extensive customization capabilities. The control implemented in the PSP BussPressor allows you to fine-tune the side chain of the high-pass filter or apply parallel compression.
PSP EasyVerb v1.7.0
A reverb with a rich, smooth and dense sound, which is created using nine high-quality algorithms designed for modeling physical spaces (environments, rooms, cameras, club rooms, halls, arenas, cathedrals), sound of spring and plate reverbs. The developers of EasyVerb tried to make the plugin as easy to use as possible, while still having enough tools to manage each algorithm, so that the user had the opportunity to fine-tune each parameter according to his own needs. In other words, PSP Audioware EasyVerb offers reverberation that is quick, easy, but acoustically complex.
PSP Echo v1.0.1
High-quality echo processor with a powerful, unique set of functions and smooth work, an ideal tool for any kind of creativity. PSP Echo can create a huge variety of effects: short percussion and sustane effects, delay with the ping-pong effect, spatial echo, etc. Using the delay sliders, you can add a special echo tape effect that will make your sound more unique. In PSPaudioware Echo, a factory preset set is included, covering a wide range of plug-in settings.
PSP MasterComp v1.7.1
Virtual dynamic processor MasterComp – can be used as a compressor and expander for mastering and for processing subgroups during mixing. There are regulators of the threshold level, the degree of compression, the time of activation and recovery (also there are automatic modes), level compensation (there is an automatic mode), the output level, two control circuit filters; Switches of peak and rms detection, hard and soft modes of operation, limiter with automatic recovery time; Level indicators. Mixing of direct and processed signals, linking of channels are possible. Processing 64-bit floating point at double sampling rate (FAT mode – Frequency Authentication Technique).
PSP MasterQ v1.5.2
The parametric equalizer MasterQ includes seven filters: high-cut and low-cut (12/24 dB / oct), a “shelf” of high and low frequencies, three peak (lower mid, middle, upper middle). All are regulated by frequency and quality factor. 64-bit floating point processing, sample rates from 44.1 to 192 kHz are supported.
PSP MixPack2 v2.1.0
A collection of six high quality plug-ins, designed to fix the quality of your tracks and mixes. These are not models of devices already created, but they have the sound and features of many analog circuits and were designed to reduce the sterility and sharpness often found in digital recordings. Do not let the name of this package deceive you – while we are working hard on this package to help you make your mixes radiant, the quality of these plugins is enough to do and mastering too.
All plug-ins use 64-bit floating-point algorithms of double precision throughout the signal path and support a sample rate of up to 192 kHz. The kit consists of: PSP MixBass2, PSP MixTreble2, PSP MixSaturator2, PSP MixPressor2, PSP MixGate2 and PSP MixSync.
All plug-ins use 64-bit floating-point algorithms of double precision throughout the signal path and support a sample rate of up to 192 kHz. The kit consists of: PSP MixBass2, PSP MixTreble2, PSP MixSaturator2, PSP MixPressor2, PSP MixGate2 and PSP MixSync.
PSP N2O v1.0.1
Multi-effector provides non-linear flexibility and freedom in building sound. High-quality sound modules can be switched in any order, guaranteeing an endless musical journey. Created with the same concept as the PSP Nitro, Nitrous Oxide has more advanced tools for sound modeling. The plug-in engine was re-written to improve sound quality and optimize for modern processors.
PSP Neon HR v2.0.3
Multi-function linear phase eight band equalizer / One of the seven filter types can be assigned to each of the bands. PSP Neon uses a frequency – a region of fast convolution (convolution) based on linear, phase algorithms for an optimal relationship between CPU efficiency and phase accuracy.
PSP NobleQ v1.7.0
PSP NobleQ combines the capabilities of passive equalizers with a wide range of frequency settings and enhanced functionality. To make this plug-in universal, we’ve added several advanced features, such as a customizable high pass filter and the ability to switch amplification or attenuation in high peak and shelf filters.
PSP NobleQ stands out with its warm sound, low-shelf filters and combined peak and shelf high frequency processing. The warmth and musical sound of PSP NobleQ was made possible by the use of FAT dual sampling processing to provide natural analog feedback. At the output, we added the Valve rounding algorithm with an adjustable degree of processing.
Low shelf filters actually combine two shelving sections: the first one allows to amplify low frequencies, the second weakens them with slightly higher settings. Together they make it possible to obtain a rich foundation without turbidity in the low and medium ranges.
The high-frequency range consists of two filters – a peak filter with adjustable bandwidth (usually for amplification) and a shelf filter (usually for attenuation). Both filters interact in such a way that the higher the attenuation at high frequencies, the more selective the peak filter becomes, thereby maintaining a similar gain in the center frequency.
PSP NobleQex is an extended version of PSP NobleQ and offers all its functions with an optional middle bell filter and adjustable low-shelf frequency offset.
PSP NobleQ stands out with its warm sound, low-shelf filters and combined peak and shelf high frequency processing. The warmth and musical sound of PSP NobleQ was made possible by the use of FAT dual sampling processing to provide natural analog feedback. At the output, we added the Valve rounding algorithm with an adjustable degree of processing.
Low shelf filters actually combine two shelving sections: the first one allows to amplify low frequencies, the second weakens them with slightly higher settings. Together they make it possible to obtain a rich foundation without turbidity in the low and medium ranges.
The high-frequency range consists of two filters – a peak filter with adjustable bandwidth (usually for amplification) and a shelf filter (usually for attenuation). Both filters interact in such a way that the higher the attenuation at high frequencies, the more selective the peak filter becomes, thereby maintaining a similar gain in the center frequency.
PSP NobleQex is an extended version of PSP NobleQ and offers all its functions with an optional middle bell filter and adjustable low-shelf frequency offset.
PSP oldTimerME v2.0.0
A vintage style compressor designed for information, compression and limitation. Our goal in developing this plug-in is to provide a simple compressor that offers exceptionally musical sound, requiring a minimum of action. This plug-in is not based on any specific hardware, rather it’s inspired by vintage processing and designed to emulate some of the favorite features of such compressors.
This compressor is so simple and so convenient that it is difficult to make it seem bad even with extreme settings!
This compressor offers a soft and smooth compression in most applications, however it can slightly embellish the sound with its tube emulation in transients when heavily driven by internally high compression values.
This compressor is so simple and so convenient that it is difficult to make it seem bad even with extreme settings!
This compressor offers a soft and smooth compression in most applications, however it can slightly embellish the sound with its tube emulation in transients when heavily driven by internally high compression values.
PSP PianoVerb2 v2.0.0
Plugin, reproducing reverberation based on piano strings. Twelve strings with adjustable attenuation and the duration of primary decay are used. Each of them is tuned to a special note, with A (55 Hz) to G # (103.8 Hz). String system PianoVerb PSP can be moved in the range of + -24 semitones.
PSP PianoVerb2 is a revised and improved version of the popular free plug-in PSP PianoVerb. Like the original, it creates a unique sound with the help of 12 resonant filters that mimic the behavior of piano strings. The effect has a modulation section, a high pass filter, independent dry / wet control and a reverberation tail freeze function.
PSP PianoVerb2 is a revised and improved version of the popular free plug-in PSP PianoVerb. Like the original, it creates a unique sound with the help of 12 resonant filters that mimic the behavior of piano strings. The effect has a modulation section, a high pass filter, independent dry / wet control and a reverberation tail freeze function.
PSP sQuad v1.5.2
A set of high-quality plug-ins of VST and RTAS formats. PSP sQuad models the characteristics and musicality of vintage EQs from leading manufacturers such as Neve, Amek and Universal Audio Pultec.
PSPaudioware has released PSP sQuad, a set of four equalizers: PSP ClassicQ, PSP ConsoleQ, PSP preQursor and PSP RetroQ.
These equalizers were developed with an eye to the capabilities and characteristics of classical devices – musicality and simplicity. It is simplicity, not primitiveness, that has been pursued by the PSP, expanding functionality with such things as a tunable filter or the ability to adjust the steepness of the shelf filter. These equalizers are effective enough to be involved at any stage of the creative process.
Processing algorithms in the PSP sQuad have much in common with each other and with other plug-ins PSP Audioware:
* Automatic doubling of the sampling frequency with initial values below 50 KHz. This is the guarantee of accuracy when working at any sampling frequency.
* 64-bit processing (numbers with double-precision floating point) to minimize the accumulated error
* Disconnected saturation in each plugin. This protects against clipping of the signal, and adds softness to the strong signal on the dynamics. The saturator is processed after the output level regulator.
PSP ClassicQ is created as a kind of different classical British EQ. There is an imitation of circuitry of class “A” and an output transformer. In addition to this classics, the equalizer is provided with simply irreplaceable things: a tunable RF filter, adjustable slope of the decay on the RF and low-pass filters. Best of all, this equalizer will sit on separate tracks of the mix.
PSP ConsoleQ was also drawn with classic British, but already console technology. It’s easy to guess that his element is also separate tracks of the mix. But it is better to apply it where the manipulations with the spectrum are strong enough.
PSP preQursor is compiled on filters using native PSP technology. Resonance in these filters is minimized in order to avoid jangling debris, to achieve a good separation of bands and narrow bandpass filtering with negative amplification. Such an equalizer asks to process the whole mix. It’s good on individual acoustic tracks and in general, where the naturalness of sound is clearly not the tenth thing.
PSP RetroQ – the embodiment of the idea of an equalizer with a unique musicality and small phase distortions. The shelf filters are taken from the PSP VintageWarmer. According to one technology, a midrange filter is built with them. “Device” is recommended for application to groups of tracks or to the whole mix.
PSPaudioware has released PSP sQuad, a set of four equalizers: PSP ClassicQ, PSP ConsoleQ, PSP preQursor and PSP RetroQ.
These equalizers were developed with an eye to the capabilities and characteristics of classical devices – musicality and simplicity. It is simplicity, not primitiveness, that has been pursued by the PSP, expanding functionality with such things as a tunable filter or the ability to adjust the steepness of the shelf filter. These equalizers are effective enough to be involved at any stage of the creative process.
Processing algorithms in the PSP sQuad have much in common with each other and with other plug-ins PSP Audioware:
* Automatic doubling of the sampling frequency with initial values below 50 KHz. This is the guarantee of accuracy when working at any sampling frequency.
* 64-bit processing (numbers with double-precision floating point) to minimize the accumulated error
* Disconnected saturation in each plugin. This protects against clipping of the signal, and adds softness to the strong signal on the dynamics. The saturator is processed after the output level regulator.
PSP ClassicQ is created as a kind of different classical British EQ. There is an imitation of circuitry of class “A” and an output transformer. In addition to this classics, the equalizer is provided with simply irreplaceable things: a tunable RF filter, adjustable slope of the decay on the RF and low-pass filters. Best of all, this equalizer will sit on separate tracks of the mix.
PSP ConsoleQ was also drawn with classic British, but already console technology. It’s easy to guess that his element is also separate tracks of the mix. But it is better to apply it where the manipulations with the spectrum are strong enough.
PSP preQursor is compiled on filters using native PSP technology. Resonance in these filters is minimized in order to avoid jangling debris, to achieve a good separation of bands and narrow bandpass filtering with negative amplification. Such an equalizer asks to process the whole mix. It’s good on individual acoustic tracks and in general, where the naturalness of sound is clearly not the tenth thing.
PSP RetroQ – the embodiment of the idea of an equalizer with a unique musicality and small phase distortions. The shelf filters are taken from the PSP VintageWarmer. According to one technology, a midrange filter is built with them. “Device” is recommended for application to groups of tracks or to the whole mix.
PSP StereoPack v1.9.8
A collection of 4 plug-ins that are intended for creating, expanding, correcting, monitoring and analyzing a stereo image in sound material.
PSP VintageWarmer2 v2.5.2
The VintageWarmer plug-in simulates a multi-band analog compressor, but can be used for single-band compression, as well as for limiting. In the single-band mode, you can apply filters of the “shelf” type of high and low frequencies. It also simulates the saturation of analog tape recorders. There are “arrow” level indicators and “LED” indicators of overload. Attached a large number of presets.
PSP Xenon v1.3.0
Full-range two-stage virtual limiter Xenon,
Plug-in format VST, RTAS and Audio Units, has a built-in flywheel,
Indication of K-System type levels (with a pink noise generator for calibrating loudspeakers).
The control circuit uses upsampling to automatically protect against inter-semiconductor peaks.
Sampling rates up to 192 kHz are supported. 64-bit floating-point processing,
When lowering the bit capacity, dithering with three psychoacoustically optimized variants of noise shaping is used.
Plug-in format VST, RTAS and Audio Units, has a built-in flywheel,
Indication of K-System type levels (with a pink noise generator for calibrating loudspeakers).
The control circuit uses upsampling to automatically protect against inter-semiconductor peaks.
Sampling rates up to 192 kHz are supported. 64-bit floating-point processing,
When lowering the bit capacity, dithering with three psychoacoustically optimized variants of noise shaping is used.
