Tested and approved for Pro Tools 11, SurCode for Dolby® E Decoder plug-in offers the unique ability to decode Dolby E files back to discrete PCM in a convenient software plug-in format. SurCode for Dolby E Decoder is the perfect way to integrate Dolby E into existing workflows on different audio workstations, in different studios and in various… Read More »
Spectral Conquest is an effect plug-in that lets you directly manipulate the frequency spectrum of audio signals. The incoming signal is analysed via a FFT (Fast Fourier Transform), resulting in the familiar spectrum plot where the full audio spectrum is split into a number of narrow frequency bands. The outgoing audio is then regenerated by an Inverse FFT.… Read More »
DyVision Reverb Remover can remove reverb from an audio signal, and also has de-essing and background noise reduction capabilities. It is designed to be used as an insert effect on stereo or mono audio signals. DyVision Reverb Remover is NOT a gate or a transient shaper, but employs an entirely new approach to separate and remove reverb and… Read More »
sixtyfive is a vintage-style, RMS Compressor, inspired by the dbx 165A, a classic 1970s compressor found in many studios, but it also adds a couple of new twists. It’s a soft-knee RMS compressor with a vintage flavour. The RMS detection and soft-knee help to give a smooth and musical compression experience, the non-linear response imparts character and the… Read More »
ClipStar is a soft clipper effect plug-in designed to prevent peaks in a subtler way than hard clipping, increase loudness and add pleasing saturation. Where ClipStar differs from other clippers is that it can leave the low frequencies untouched, where distortion is more evident, and allow a greater boost in gain without noticeably degrading the signal. You can… Read More »
DrMS puts you in control DrMS presents a new way to approach the manipulation of stereo audio. It is based on MS (Mid-Side) processing, although DrMS splits the stereo signal into four sections rather than the normal two, giving you new levels of control: Zoom in, add Depth, change Width or any combination and more. DrMS takes you… Read More »
TripleComp is an advanced and easy to use three band compressor/limiter plugin designed to boost the overall loudness of your music in a very comfortable way. It is mainly intended for “inaudible” compression at the mastering stage, not for sound design. TripleComp splits up your audio signal into high, mid and low frequency bands. These bands are processed… Read More »
The SurCode for Dolby Pro Logic II software matrix encoder allows broadcasters, game developers, video producers, and audio professionals everywhere to easily encode 5.1 surround mixes into stereo soundfiles. Surround ambiences, sound effects, and music stems can all be pre-encoded for delivery within stereo cues, and the resulting mix is completely stereo-compatible. Dolby Pro Logic II encoding is… Read More »
Based on V-Plugs “Smart Dynamic Control” technology (SDC), Uranium presents an alternative to classic compressors with a distinctive sound and features. SDC Technology The SDC technology uses a sophisticated ‘look ahead’ algorithm that analyzes the signal level over time. According to this analysis, Uranium applies compression by increasing the quiet parts and attenuating the louder ones simultaneously. This… Read More »
dirtbox is an effect plug-in designed to compress, distort and modulate your audio into a whole new filthy world, from subtle warmth to dynamic destruction. Its arsenal of dirty-bombs cover parallel compression, many flavours of dirt and filth, bit crushing, sample rate dropping and ring modulation. Add to that a 4 way XY pad and 2 tempo-sync LFOs… Read More »
Quartz is a unique multi-effect plug-in that turns the simplest sounds into ever evolving rhythmic soundscapes. But that’s not everything. It is also a source of creative modulation which can be used to control parameters outside of Quartz such as software instruments, plug-ins or even external MIDI equipment. Quartz gets its name from the fact that all Line… Read More »
Virtual Bass Amp Pro is a Bass Amp Modeling plug-in. Features: 2 Discrete Channels each with independent compressor, gain, tone, and limiter controls modeled using Studio Devil’s patented digital vacuum tube modeling technology. A/B Switch and MIX Control to switch between channels or blend both channels together. Bi-Amp Mode with tunable crossover lets you send lows to… Read More »
Studio Devil utilizes the world’s best tube modeling algorithms from Gallo Engineering to bring you the best in simulated tube amplifier tone. Many others have tried…but only one delivers the dynamic response you’ve come to expect from real tube amps. A plugin that simulates guitar amplifiers and cabinets. + 18 different amp models + 3 amp style:… Read More »
Amp Modeler Pro is an amp modeling and studio effects plug-in. Features: 15 Preamp Models cover every range of playing styles and modeled using Studio Devil’s proprietary digital vacuum tube modeling technology. Gain, Bass, Mids, Treble, and Presence controls that interact with your tone just like on real tube amps. Boost, Deep, and Bright switches quickly liven up… Read More »
The The RS124 Compressor Plug-In provides genuine compressor valve emulations that were introduced in the 1960s and have been continuously used in studios for a decade. This is the sound of Abbey Road 60s! Their warm sound personality and distinctive features, such as the ‘HOLD’ function, make this compressor ideal for recording, mixing and mastering. Each module… Read More »
The Tonelux Tilt plug-in is a fast and easy way of making a track sit better in a mix or make it sound “warmer” or “cooler”. It’s also perfect in a live situation where you need to tweak the whole mix to adjust for ear fatigue. The Tilt Plug-in is a joint development effort between Tonelux designer… Read More »
LX480 Lite is an accurate emulation of a legendary hardware reverb. The plug-in goes far beyond emulation by using the exact same reverb technology and introducing higher density modes and functions not found on the original. Features: Faithful recreation of the Random Hall algorithm from the well known hardware reverb. Modeled input and output stages – Everything is… Read More »
Discord is a model of the first mass-produced pitch-shifter, which was a studio standard found in control rooms the world over. Discord has all the features you know and love from the original, along with added controls to take advantage of the modern DAW environment and is suitable for everything from subtle vocal doubling and “stereo-izing” to extreme… Read More »
AdrenaLinn Sync provides a variety of creative beat-synced filter modulation and sequencing effects, achieved by routing an LFO and 2-bar looped sequencer to control filter frequency, volume and pan. Version 2, completely rewritten in collaboration with plug-in developer Way Out Ware, greatly enhances filter quality, adds a new 3D-rendered UI, removes version 1’s dependence on Pluggo technology and… Read More »
CSR (Classik Studio Reverb) includes a suite of four different reverbs algorithms, each with its own interface and parameters: Classik Hall / Room. Classik Ambience. Classik Plate. Classik Inverse. Easy and advanced mode CSR-1 offers 2 operating modes for each of the four algorithms: Easy and Advanced. In Easy mode the user will be able to quickly edit… Read More »
Studio Devil VGA (Virtual Guitar Amp) is a guitar tube amplifier modeling plug-in for Windows VST-compatible audio hosts that is designed to mimic the character of 18 distinct vacuum tube amplifier channels. This virtual tube amplifier processor is based on authentic models of 12AX7A vacuum tube preamps and tube power stages. While primarily intended for guitar amp… Read More »
Set of plug-ins from AAY-Audio. It consists of four plug-ins including the famous simulator of tube distortions aTube. List of plugins included in the set: AAY-Audio.aMS-ToolsPRO.VST.v1.01 AAY-Audio.aQ-31.VST.v1.01 AAY-Audio.aStereolizer.VST.v1.01 AAY-Audio.aTube.VST.v1.01 Year / Release Date : 07.2010 Version : 1.01 Developer : AAY-Audio Bit depth : 32bit Compatibility with Vista : complete Compatible with Windows 7 : full Language… Read More »
A set of plug-ins for processing from Plug-in Conspiracy. The original idea was that you could pay for the plug-ins as much as you wanted (for free, though, they did not give it away). Now the site of the manufacturer produces 404, and you can share this beautiful set with a clear conscience. VU Meter – level monitoring… Read More »
iZotope, Inc., a leading innovator in audio signal processing technology, licensed audio software extensions and DSP algorithms in Grass Valley for its new EDIUS 5 non-linear editing platforms. The software includes a third-party bunch of plug-ins developed to help video professionals create high-quality content. The included iZotope tools bring comfortable high-level audio processing to the EDIUS video editing… Read More »
A set of six plug-ins: GateEx : gate / expander, PitchCraft : intonator, Repli-Q : a copy-spectrum processor, Reveal : analyzer and indicator, Sqweez-3 & 5 : multi-band dynamic processor, SuperFreq : Paragraph EQ. Developer’s site : BIAS Platform : Windows x86 Version : 1.2.1 System requirements : * Intel P3 / P4, Athlon w / SSE Instructions… Read More »
